Code Alarm CA-130 Guía de usuario descargar pdf (Pagina 32)

– 32 –

6FKHGXOLQJ



$ERXW6FKHGXOLQJ

The system provides one end-user schedule (programmable by master/installer only),

which can control various types of events.

•

Each schedule causes a defined event to start and stop (when appropriate) at a

specified time.

•

Schedules can be set to automatically repeat at various intervals.

•

Schedules can be set for random starting, if desired.

&UHDWLQJ6FKHGXOHV

+ [#] + [6] [4]

(Master Code)

Alpha Displays:

Enter “01” as the 2-digit schedule number.

Press [

∗

] to continue.

Enter the desired 2-digit event number from the

following list.

00 = clear the scheduled event

01 = turn a programmed output on or off

(see Using Device Commands section for a list of output device numbers used

in your system)

02 = set a user access schedule for one or more users

(see Security Codes section for an explanation of access groups)

03 = send a “latch-key” report to a pager if the system is not disarmed by a specified

time; message sent is “777-7777.”

04 = automatically arm the system in STAY mode at a specified time

05 = automatically arm the system in AWAY mode at a specified time

06 = automatically disarm the system at a specified time

07 = Display the word “REMINDER” at a specified time

Press [∗] to continue.

4. For event number “01,” enter the output number

associated with this schedule.

Otherwise, this prompt is skipped.

Press [∗] to continue to the “Start” prompt below.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Sin comentarios

Code Alarm CA-130 Guía de usuario Pagina 32