Code Alarm ca6554 Guía de instalación descargar pdf (Pagina 33)

15 - Accessory Output: Programmable high current output.

Accessory - Output becomes active with the same timing as the accessory

output, drops out during crank.

Ignition - Output becomes active with the same timing as the ignition output

and does not drop out during crank.

Start / Crank - Output becomes active with the same timing as the starter

output wire, during crank only.

16 - Pulse Additional Outputs w/ Unlock: When the Unlock button is pressed

on the remote transmitter the system will also simultaneously pulse additional

outputs. Ignition, Accessory & Ground While Running outputs for 1 second. The 3rd

setting also activates the pulse after shutdown output to turn off the RAP on certain

vehicles.

OFF - When Unlock is pressed no additional outputs are activated.

IGN, ACCY, GWR - When the Unlock button is pressed the system will also

simultaneously pulse the Ignition, Accessory & Ground while Running outputs

for 1 second.

IGN, ACCY, GWR, then Pulse After Shutdown - When the Unlock button is

pressed the system will also simultaneously pulse the Ignition, Accessory &

Ground while Running outputs for 1 second then waits 2 seconds then pulses

the green/white pulse after shutdown wire for 1 second.

17 - Door Lock Control During Remote Start: Controls the systems door lock outputs

during the remote start sequence.

OFF - The system will not lock or unlock the vehicle.

Unlock before Start, Lock After Start - Unlock Pulse before remote start

sequence begins, Lock pulse after remote start sequence is complete and

engine is running.

Unlock Before Start - Unlock Pulse before remote start sequence begins.

Lock After Start - Lock pulse after remote start sequence is complete and

engine is running.

Lock After Shutdown - Lock pulse after remote start shutdown sequence is

complete.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Sin comentarios

Code Alarm ca6554 Guía de instalación Pagina 33